High Performance Coatings

High-Performance Coating, Epoxies, Urethanes, Alkyds, High Gloss Epoxy

PPG's High Performance Coatings provide aesthetically appealing coatings and coating systems for education, healthcare, hospitality, government, municipal, warehouse, and industrial facilities.

AQUAPON

AQUAPON® 35 Polyamide-Epoxy Gloss

AQUAPON® 35 Polyamide-Epoxy Gloss


Recommended for heavy duty service in corrosive industrial atmospheres where a tough, impact, abrasion and mar-resistant coating is needed. Apply over properly prepared and primed steel, galvanized steel or aluminum. Also recommended for use on masonry surfaces, including plaster walls, cement composite board and concrete block.
AQUAPON® 35 Polyamide-Epoxy Gloss Bases

AQUAPON® 35 Polyamide-Epoxy Gloss Bases


AQUAPON® 35 Polyamide-Epoxy Gloss is recommended for heavy duty service in corrosive industrial atmospheres where a tough, impact, abrasion and mar-resistant coating is needed. Apply over properly prepared and primed steel, galvanized steel or aluminum. Also recommended for use on masonry surfaces, including plaster walls, cement composite board and concrete block.
AQUAPON® High Build Semi-Gloss Polyamide-Epoxy Coatings

AQUAPON® High Build Semi-Gloss Polyamide-Epoxy Coatings


AQUAPON® High Build Semi-Gloss Polyamide-Epoxy Coatings are high build, corrosion resistant finishes that have excellent hardness, abrasion and mar resistance and outstanding adhesion qualities. They are recommended for heavy duty service in corrosive industrial atmospheres. The 97-130/97-139 are recommended for some immersion service when applied over properly prepared and primed steel. Also can be applied over hot dipped galvanized steel, aluminum, masonry, well-cured plaster, cement fiberglass composite, wood or concrete.

AQUAPON® LT NSF Low Temperature Epoxy Coatings

AQUAPON® LT NSF Low Temperature Epoxy Coatings


AQUAPON® LT is an NSF approved low temperature two component epoxy coating. The AQUAPON LT coatings are compliant to NSF 61 standard for potable water tanks, piping, values and fittings. Contact PPGAF Technical Service. This product can be applied 5 to 7 mils per coat up to 18 mils maximum DFT using any combination of colors. AQUAPON LT can extend the coating period for cold climates and is recommended for application on damp surfaces and for jobs where a fast recoat is required.
AQUAPON® Polyamide-Epoxy Coatings

AQUAPON® Polyamide-Epoxy Coatings


Recommended for heavy-duty service in corrosive industrial environments over properly prepared and primed steel, galvanized steel, aluminum, copper and brass. Also recommended for use on masonry surfaces, plaster walls, drywall construction, cement-fiberglass board, wood, and concrete block where a tough, impact resistant coating is needed. Recommended for use as a floor finish in heavy traffic and chemical spill areas.
AQUAPON® WB Interior Floor Coating

AQUAPON® WB Interior Floor Coating


AQUAPON® WB Interior Floor Coating is a complete floor topcoat or it can be used as a sealer and dust-proofer for interior concrete floors in industrial environments. It provides a tough, chemical resistant finish with excellent hardness in addition to abrasion, mar and stain resistance. Reduces maintenance costs by reducing dusting and wear on concrete floors. Use as a clear topcoat over a wide variety of water borne or alkyd floor coatings or marking paints.
AQUAPON® WB Water Base Epoxy

AQUAPON® WB Water Base Epoxy


AQUAPON® WB is a water-borne epoxy interior/exterior coating system for use in commercial, institutional or industrial environments or where a tough, impact, abrasion, mar and stain resistant coating is required. Suitable for use on properly prepared and primed steel, galvanized metal, aluminum, copper, plaster, concrete, masonry, and wood surfaces. Also recommended as a floor coating.
AQUAPON® WB Water Base Epoxy Primer

AQUAPON® WB Water Base Epoxy Primer


AQUAPON® WB primers are the primer complement to the AQUAPON WB Water-Borne Epoxy interior/exterior coating system. These products are intended for use in commercial, institutional or industrial environments or where a tough, impact, abrasion, mar and stain resistant coating is required. Suitable for use on properly prepared and primed steel, galvanized metal, aluminum, copper, plaster, concrete, masonry, and wood surfaces.
AQUAPON® Zinc Rich Primer

AQUAPON® Zinc Rich Primer


Sacrificial primer for abrasive blasted steel, especially in fresh or salt water service. This product is also recommended for field touch up of shop applied inorganic zinc primers prior to application of high performance topcoats.

COAL CAT

COAL CAT® Resinous Cured Coal Tar

COAL CAT® Resinous Cured Coal Tar


Intended for heavy industrial coating systems for immersion and environmental resistance to: fresh and salt water, many organic and inorganic acids, inorganic bases and salts, crude oils, petroleum and petro-chemical products, oil brines, sewage water, hydrogen sulfide liquors and fumes.

DuraPrep

DuraPrep® PREP100 Concrete Etch

DuraPrep® PREP100 Concrete Etch


A gelled compound specially designed to provide an evenly etched surface on concrete. Similar performance to hydrochloric or muriatic acid, but safer to use and produces 80% less odor and no corrosive fuming. Also easier to neutralize and rinse than liquid acids since it does not penetrate deeply or unevenly into the concrete.
DuraPrep® PREP120 Concentrated Multi-Purpose Cleaner

DuraPrep® PREP120 Concentrated Multi-Purpose Cleaner


A highly concentrated, economical cleaner capable of handling many types of cleaning applications in industrial, commercial, automotive and marine applications.
DuraPrep® PREP125 Concentrated Degreaser

DuraPrep® PREP125 Concentrated Degreaser


A highly concentrated degreaser designed for removing heavy oil and grease contamination from floors, equipment and machinery.
DuraPrep® PREP130 Industrial Cleaner (Gel)

DuraPrep® PREP130 Industrial Cleaner (Gel)


A gelled, ready-to use, product that can be sprayed, brushed, rolled or mopped on and cling to surface to provide extended dwell time in hard to reach areas. Designed for large structures, vertical surfaces, and other areas where increased contact time may be substituted for scrubbing.
DuraPrep® PREP200 Architectural Coating Remover (Gel)

DuraPrep® PREP200 Architectural Coating Remover (Gel)


Designed to remove the full range of architectural and many commercial coatings from common substrates such as wood, brick, stucco, masonry, metals and many composites. Specifically intended to replace grinding or blasting when damage to the substrate is a concern. The low odor makes it ideal for use near occupied areas.
DuraPrep® PREP220 Commercial Coating Remover (Gel)

DuraPrep® PREP220 Commercial Coating Remover (Gel)


Lifts urethanes, alkyds, siloxanes and most two-component epoxies. Ideal for removing thick film concrete floor coatings. Use on nearly all substrates including steel, aluminum, concrete, composite, and masonry.
DuraPrep® PREP225 Spray Gun and Parts Coating Remover

DuraPrep® PREP225 Spray Gun and Parts Coating Remover


This immersion paint remover cleans spray guns and paint application equipment. This user-friendly alternative to toxic and regulated products is ideal for stripping small parts, hooks & hangers.
DuraPrep® PREP240 Industrial Coating Remover (Gel)

DuraPrep® PREP240 Industrial Coating Remover (Gel)


Lifts most high performance coatings such as urethanes and epoxy topcoats and primers, siloxanes, fuel resistant primers and chemical agent resistant coatings (CARC). Use on nearly all substrates including steel, aluminum, concrete, composite, and masonry.
DuraPrep® PREP400 Overspray & Graffiti Remover

DuraPrep® PREP400 Overspray & Graffiti Remover


An easy-to-use product designed to remove over-spray, tar and road marking paint from a painted surface without damaging the underlying paint. Also effective when removing fresh graffiti from painted surfaces.
DuraPrep® PREP500 Flooring Adhesive and Mastic Remover

DuraPrep® PREP500 Flooring Adhesive and Mastic Remover


A fast and easy-to-use product that quickly softens and removes carpet underlayment, black mastic, and many glues. This labor saving formula can remove indoor/outdoor carpeting and the glue below it in one application.
DuraPrep® PREP88 Alkaline Cleaner

DuraPrep® PREP88 Alkaline Cleaner


The PREP88 is a biodegradable concentrated water-based alkaline cleaner that is designed for industrial or commercial use. It can applied to the surface with a low pressure sprayer, brush or roller.
DuraPrep® PREP900 PPG Paint & Colorant Solidifier

DuraPrep® PREP900 PPG Paint & Colorant Solidifier


PPG Paint & Colorant Solidifier Provides an environmentally acceptable way to dispose of unwanted water-based paint and colorants by quickly turning them into a solid for legal disposal. Provides a dramatic cost savings compared with the disposal of liquid paint.

DURETHANE

DURETHANE® DTM Urethane Mastic

DURETHANE® DTM Urethane Mastic


DURETHANE® DTM is a surface tolerant, high solids, high build, two component acrylic urethane formulated for direct-to-metal applications. This product is compliant for applications in areas with VOC* requirements of less than 250 g/L (2.08 lbs./gal.).

FAST DRY

FAST DRY™ 2500 Alkyd Enamels

FAST DRY™ 2500 Alkyd Enamels


Fast Dry 2500 is an excellent single component, high gloss, fast dry vinyl modified alkyd enamel that is recommended for interior and exterior use on properly prepared and primed metal surfaces. Easy to apply and abrasion resistant, Fast Dry 2500 is ideal for product finish applications where a super fast dry gloss enamel is required for fast production and handling.
FAST DRY™ 35 Gloss Alkyd Enamels

FAST DRY™ 35 Gloss Alkyd Enamels


Recommended for interior and exterior use on properly prepared and primed ferrous metal, machinery, heavy equipment, piping and other related industrial surfaces. Fast dry for rapid re coating. For improved performance and corrosion protection, apply over Fast Dry 35® Primers.
FAST DRY™ 35 Inhibitive Primers

FAST DRY™ 35 Inhibitive Primers


Recommended for exterior and interior surfaces of ferrous metal, machinery, heavy equipment, piping, and other related industrial surfaces. These primers are fast drying and formulated with inhibitive properties to prevent corrosion.

High Gloss Epoxy

PPG HPC High Gloss Epoxy

PPG HPC High Gloss Epoxy


The PPG HPC High Gloss Epoxy is a two-component polyamine–epoxy coating with over 80% volume solids and a low–VOC which give it excellent coverage and meets governmental regulations in most states. The hard “tile–like” finish and super high gloss features make it suitable for use in architectural applications on walls and floors for ease of application and cleaning. The epoxy backbone of this coating also makes it the choice for light duty industrial applications where good abrasion resistance and chemical resistance are required for interior storage tanks, beams, machinery, piping, school lockers, etc.

MegaSeal

MegaSeal™ HDSL Heavy Duty Self-Leveling Epoxy Coating

MegaSeal™ HDSL Heavy Duty Self-Leveling Epoxy Coating


MegaSeal™ HDSL is a spreadable self-leveling epoxy surfacer for concrete floor protection where a smooth cleanable floor surface is required. MegaSeal HDSL may be applied over a broad temperature range at varying thickness. Always mix packaged amounts of resin, cure and powder.

MegaSeal™ High Performance Urethane

MegaSeal™ High Performance Urethane


MegaSeal™ HPU displays high gloss and excellent color and gloss retention during extended service periods. The direct-to-metal capabilities of MegaSeal HPU provide a single-coat system at reduced installation cost for use in protected environments. Compatible over prepared, smooth coldrolled steel and abrasive blasted hot-rolled steel. MegaSeal HPU has excellent adhesion to concrete providing a durable, glossy, easy-to-clean flooring system. May be used over MegaSeal TF as a durable, weather-resistant topcoat for extra heavy duty service.
MegaSeal™ HSPC 100% Solids Epoxy Primer/Sealer

MegaSeal™ HSPC 100% Solids Epoxy Primer/Sealer


MegaSeal HSPC is a low viscosity, 100% solids, two component, high build, fast cure epoxy primer/sealer. MegaSeal HSPC enhances adhesion by penetrating into the concrete substrate and helps reduce bubbling and pinholes that may occur when coating porous surfaces.
MegaSeal™ SL Self-Leveling Epoxy Floor Coating

MegaSeal™ SL Self-Leveling Epoxy Floor Coating


MegaSeal™ SL is a spreadable self-leveling epoxy floor coating for concrete floor protection where a smooth cleanable floor surface is required. MegaSeal SL is an offset for KL8410. MegaSeal SL may be applied over a broad temperature range at varying thickness. Always mix packaged amounts of resin, and cure. DO NOT vary mix ratio. MegaSeal FLK Flake Additive decorative vinyl chips or MegaSeal QTZ Quartz Additive color quartz may be used with MegaSeal SL for an attractive, durable finish
MegaSeal™ SL Tintable

MegaSeal™ SL Tintable


MegaSeal SL Tintable & Crystal Clear is a two component, 100% solids, high performance, self-leveling floor coatings. This system provides a high gloss and a seamless hygienic surface that is extremely hard wearing durable. Its film thickness can be varied to accommodate a wide range of flooring conditions and it possesses a high chemical resistance.
MegaSeal™ TF Thin Film Epoxy

MegaSeal™ TF Thin Film Epoxy


MegaSeal™ TF low solvent level meets VOC* requirements, reduces the chances for film pinholing and solvent entrapment at the substrate-coating interface, often a major cause of coating failure with conventional epoxies and lower solids systems. MegaSeal TF is available in a variety of colors, and therefore does not require a topcoat.
MegaSeal™ WRU

MegaSeal™ WRU


MegaSeal™ WRU displays excellent color and gloss retention during extended service periods. MegaSealWRU has excellent adhesion to primed concrete providing a durable, easy-to-clean flooring system. May be used over MegaSeal TF as a durable, abrasion-resistant topcoat for extra heavy duty service.
PPG Anti-Slip Safety Flooring Systems SFT 600

PPG Anti-Slip Safety Flooring Systems SFT 600


PPG Anti-Slip Safety Flooring Systems SFT 600 is a water-based flexible acrylic anti-slip floor and deck coating formulated for pedestrian traffic. This anti-slip safety coating is easy to apply, dries quickly and offers optimum adhesion to asphalt, concrete,wood, and metal surfaces. SFT600 is easy to clean up, economical to use and since it's a one-component product it may be resealed and saved for future use.
PPG Anti-Slip Safety Flooring Systems SFT 610

PPG Anti-Slip Safety Flooring Systems SFT 610


A two-component, water-based epoxy anti-slip for recreation and barefoot traffic areas. Also available as a single-component, solvent-based epoxy ester, SFT 610S.

PPG Anti-Slip Safety Flooring Systems SFT 625

PPG Anti-Slip Safety Flooring Systems SFT 625


PPG Anti-Slip Safety Flooring Systems SFT 625 is a one component modified epoxy anti-slip floor and deck coating engineered to resist heavy pedestrian traffic. This coating is easy to apply and adheres to concrete,metal, and wood surfaces. SFT 625 is fire retardant when dry. It resists oil, gasoline, acids, caustics, and most solvents. Since it's a one-component product it may be resealed and saved for future use.
PPG Anti-Slip Safety Flooring Systems SFT 650

PPG Anti-Slip Safety Flooring Systems SFT 650


PPG Anti-Slip Safety Flooring Systems SFT 650 is a two-component epoxy anti-slip floor and deck coating formulated for industrial, marine, vehicular and pedestrian traffic.
PPG Anti-Slip Safety Flooring Systems SFT 675

PPG Anti-Slip Safety Flooring Systems SFT 675


PPG Anti-Slip Safety Flooring Systems SFT 675 is a two-component zero V.O.C. (volatile organic content), fast curing epoxy anti-slip floor and deck coating engineered for slippery areas and used to resist heavy rolling and pedestrian traffic. SFT 675 is suitable for marine and industrial environments while being easy to apply. Its low odor characteristic makes it suitable for odor sensitive applications such as wineries, food processing facilities, hospitals and confined areas. It adheres to concrete, metal and wood surfaces. SFT 675 is fire retardant when dry. It has excellent chemical resistance to oil, gasoline, acids, caustics, hydraulic fluids and most solvents.

MetalCase

MetalCase™ Int/Ext Gloss Alkyd

MetalCase™ Int/Ext Gloss Alkyd


MetalCase™ Gloss Alkyd is an interior/exterior gloss alkyd enamel that is ideal for use on properly prepared metal substrates. MetalCase offers full color capability through our Voice of Color® color system and possess a durable gloss finish.
MetalCase™ ShopCoat Primers

MetalCase™ ShopCoat Primers


Recommended for interior and exterior use as a shop primer on ferrous metal where fast-drying properties are desired. Good resistance to normal atmospheric corrosive action.

METALHIDE

 METALHIDE® One-Pac Inorganic Zinc Rich Primer

METALHIDE® One-Pac Inorganic Zinc Rich Primer


METALHIDE ONE-PAC® Inorganic Zinc Rich Primers are intended for use in industrial service on properly prepared ferrous metal surfaces. They provide excellent galvanic protection and weathering, similar to galvanizing. Excellent for use in coastal, marine or offshore environments.
METALHIDE® 2000 Inorganic Zinc Rich Coating

METALHIDE® 2000 Inorganic Zinc Rich Coating


Heavy duty corrosion resistant primer for ferrous metal surfaces in industrial environments. Provides galvanic protection similar to galvanizing. Particularly suited as a lining for the interior, and as a primer to be top-coated for the exterior of tanks containing organic solvents, gasoline, and other fuels. It is also excellent for application in coastal, marine, and other offshore environments.

MULTIPRIME

MULTIPRIME® Epoxy Fast Dry Primer

MULTIPRIME® Epoxy Fast Dry Primer


MULTIPRIME® EFD Epoxy Fast Dry Inhibitive Primer is a fast drying primer for use over properly prepared metal surfaces. This product can also be used as a high build intermediate over zincs and other primers.
MULTIPRIME® Low VOC*

MULTIPRIME® Low VOC*


MULTIPRIME® Low VOC* primers are inhibitive metal primers for use on ferrous metal or aluminum substrates. They may be top-coated with a variety of topcoats including epoxy, vinyl, urethane or conventional finishes. They may also be used as a barrier coat over existing alkyd systems to allow top-coating with strong solvent containing topcoats.

PITT-GUARD

 PITT-GUARD® Direct-To-Rust Epoxy Mastic Coatings

PITT-GUARD® Direct-To-Rust Epoxy Mastic Coatings


PITT-GUARD® DTR products are intended for use where one coat high build barrier type protection is required for properly prepared metal substrates such as steel, aluminum or hot dipped galvanized steel and for use on properly prepared masonry. Their excellent wetting properties allow application and good performance over tightly adhering rust.
PITT-GUARD® All Weather Direct-To-Rust Epoxy Coatings

PITT-GUARD® All Weather Direct-To-Rust Epoxy Coatings


These products are recommended for application to extend the coating period for cold climates, for damp surfaces and for jobs where fast recoat is required. Use on exterior/interior jobs where one coat high build barrier type protection is required. Adheres to properly prepared rusty surfaces.
PITT-GUARD® Rapid-Coat Direct-to-Rust Epoxy Mastic Coatings

PITT-GUARD® Rapid-Coat Direct-to-Rust Epoxy Mastic Coatings


PITT-GUARD® Rapid Coat Direct-To-Rust Epoxy is intended for interior/exterior use where barrier type protection is required for steel, aluminum, hot dipped galvanized steel and masonry surfaces. It's excellent wetting properties allow application and good performance over tightly adhering rust. Excellent performance is obtained over abrasive blasted surfaces.

PITT-TECH

 PITT-TECH® Int/Ext Primer/Finish DTM Industrial Enamel

PITT-TECH® Int/Ext Primer/Finish DTM Industrial Enamel


Recommended for use on properly prepared interior or exterior metal surfaces, in light to moderate industrial climates for maintenance or new construction. Use wherever an easy to use, low VOC* primer is required to prepare most metal surfaces. Enhances adhesion of the final finish. Can be used as a primer under Pitt-Tech® or other PPG Pittsburgh Paints® topcoat products.
PITT-TECH® EDF Exterior Waterborne Acrylic Semi-Gloss Dry Fog

PITT-TECH® EDF Exterior Waterborne Acrylic Semi-Gloss Dry Fog


Pitt-Tech® EDF is an exceptional direct to metal, interior/exterior, semigloss acrylic dry fog and is designed to prevent over-spray on surrounding structures. Easy to apply, Pitt-Tech EDF possesses excellent exterior durability, dry fall properties, and color and gloss retention and transfer efficiency. This rust inhibitive coating adheres to lightly rusted surfaces and protects from the long term effects of weathering and corrosion. Pitt-Tech EDF is ideal for use on a wide range of substrates and structures such as: Exterior Tanks and Towers, Piping, Building Exteriors, Manufacturing Facilities, Production Facilities.
PITT-TECH® Int/Ext High Gloss DTM Industrial Enamels

PITT-TECH® Int/Ext High Gloss DTM Industrial Enamels


Pitt-Tech® High Gloss Industrial Enamels are a full line of 100% Acrylic water borne enamels designed for direct-to-metal application. These products provide corrosion protection, chemical and solvent resistance, and are fast drying with low odor. Recommended for use on properly prepared interior or exterior metal, masonry, plaster, and drywall surfaces.
PITT-TECH® Interior/Exterior Satin DTM Industrial Enamels

PITT-TECH® Interior/Exterior Satin DTM Industrial Enamels


Pitt-Tech® Satin Industrial Enamels are a full line of 100% Acrylic water borne enamels designed for direct-to-metal application. These products provide corrosion protection, chemical and solvent resistance, and are fast drying with low odor. Recommended for use on properly prepared interior or exterior metal, masonry, plaster, and drywall surfaces.
PITT-TECH® Plus Interior/Exterior DTM Industrial Primer

PITT-TECH® Plus Interior/Exterior DTM Industrial Primer


Recommended for use on properly prepared interior or exterior metal surfaces, in light to moderate industrial climates for maintenance or new construction. Use wherever an easy to use, low VOC* primer is required to prepare most metal surfaces. Enhances adhesion of the final finish. Can be used as a primer under Pitt-Tech® Plus topcoat products.
PITT-TECH® Plus Interior/Exterior High Gloss DTM Industrial Enamel

PITT-TECH® Plus Interior/Exterior High Gloss DTM Industrial Enamel


Pitt-Tech® Plus Semi-Gloss Industrial Enamels are a full line of 100% Acrylic waterborne enamels designed for direct-to-metal application. These products provide corrosion protection, chemical and solvent resistance, and are fast drying with low odor. Recommended for use on properly prepared interior or exterior metal, masonry, plaster, and drywall surfaces.
PITT-TECH® Plus Interior/Exterior Satin DTM Industrial Enamel

PITT-TECH® Plus Interior/Exterior Satin DTM Industrial Enamel


Pitt-Tech® Plus Satin Industrial Enamels are a full line of 100% Acrylic waterborne enamels designed for direct-to-metal application. These products provide corrosion protection, chemical and solvent resistance, and are fast drying with low odor. Recommended for use on properly prepared interior or exterior metal, masonry, plaster, and drywall surfaces.
PITT-TECH® Plus Interior/Exterior Semi-Gloss DTM Industrial Enamel

PITT-TECH® Plus Interior/Exterior Semi-Gloss DTM Industrial Enamel


Pitt-Tech® Plus Semi-Gloss Industrial Enamels are a full line of 100% Acrylic waterborne enamels designed for direct-to-metal application. These products provide corrosion protection, chemical and solvent resistance, and are fast drying with low odor. Recommended for use on properly prepared interior or exterior metal, masonry, plaster, and drywall surfaces.

PITT-THERM

PITT-THERM® High Heat & Stress Corrosion Coating

PITT-THERM® High Heat & Stress Corrosion Coating


This coating is intended for use on austenitic stainless and carbon steel to provide protection against chloride attack and stress corrosion cracking on both insulated and uninsulated surfaces. PITT-THERM® has excellent thermal shock and barrier properties, and may be used as a heat resistant coating for carbon steel.

PITT-PITTHANE

PITTHANE® 35 Gloss Urethane Enamels

PITTHANE® 35 Gloss Urethane Enamels


Pitthane® 35 Gloss Urethane Enamels are recommended as topcoats in coating systems where color and gloss retention are primary considerations. They also provide good chemical resistance and above average heat resistance.
PITTHANE® High Build Semi-Gloss Urethane Enamel

PITTHANE® High Build Semi-Gloss Urethane Enamel


PITTHANE® High Build Semi-Gloss is a durable, high build, acrylic urethane that is recommended for use where a semi-gloss appearance and delayed onset of chalking are desired. Easy to apply, the PITTHANE High Build Semi-Gloss can be brushed, rolled or sprayed and offers excellent color and gloss retention. Available in both white and neutral bases, this product has infinite color capability through our PERFORMACOLOR® tint system. In addition, faster dry time (dry to handle in approximately 5.5 hours or 55 minutes with accelerator), a 2.8 VOC*, and longer pot life are features that make it ideal for industrial and commercial use.
PITTHANE® ULTRA Gloss Urethane Enamels

PITTHANE® ULTRA Gloss Urethane Enamels


PITTHANE® Ultra Gloss Urethane Enamels are recommended as topcoats in coating systems where color and gloss retention are primary considerations. They also provide superior chemical resistance and heat resistance

Sil-Shield

Sil-Shield™ Silicone Alkyd Enamel High Gloss

Sil-Shield™ Silicone Alkyd Enamel High Gloss


Sil-Shield Silicone Alkyd Gloss Enamels are high solids, single component topcoats that are intended for use on interior or exterior, moderate industrial exposure. Ideal for use on structural steel, tanks, piping and towers. Sil-Shield offers infinite color capability through PerformaColor Color System.

SPEEDHIDE

SPEEDHIDE® Int/Ext Galvanized Steel Primer

SPEEDHIDE® Int/Ext Galvanized Steel Primer


Recommended for direct application to new degreased or weathered galvanized steel. No acid pretreatment is necessary before application. SPEEDHIDE® Galvanized Steel Primer is a ready-mixed primer that is resistant to normal atmospheric corrosion.
SPEEDHIDE® Int/Ext Rust Inhibitive Steel Primers

SPEEDHIDE® Int/Ext Rust Inhibitive Steel Primers


Recommended for properly prepared iron and steel surfaces for either interior or exterior service. SPEEDHIDE® Rust Inhibitive Primer provides surface corrosion protection under normal exposure conditions.
SPEEDHIDE® Int/Ext Zinc Chromate Metal Primer

SPEEDHIDE® Int/Ext Zinc Chromate Metal Primer


Recommended for properly prepared aluminum, and ferrous metal, SPEEDHIDE® Zinc Chromate Metal Primer can be used on both interior and exterior surfaces. This product provides resistance to normal atmospheric corrosive action and is recommended as a field applied primer coat or intermediate coat.

Other Products

7 Line Interior/Exterior Industrial Gloss Oil

7 Line Interior/Exterior Industrial Gloss Oil


7-Line industrial enamels are for industrial use and may be used on properly prepared and primed interior or exterior surfaces of wood, metal, masonry, plaster, and composition board. Recommended for use on floors and machinery.
Cementitious Waterproofing Block Filler

Cementitious Waterproofing Block Filler


Cementitious Masonry Waterproofing Block Filler can be used to fill, seal, and waterproof interior and exterior unpainted concrete, concrete block, brick and other masonry surfaces. This product can be top-coated with a wide variety of architectural and industrial maintenance paints and coatings, except alkyds and oils.
Int. Industrial Enamel Lo-Lustre Oil

Int. Industrial Enamel Lo-Lustre Oil


Industrial Enamels are for industrial use and may be used on properly prepared and properly primed interior surfaces of wood, metal, masonry, plaster, composition board, and machinery.
Int. Industrial Semi-Gloss Oil

Int. Industrial Semi-Gloss Oil


Industrial Enamels are for industrial use and may be used on properly prepared and properly primed interior surfaces of wood, metal, masonry, plaster, and composition board.
Int/Ext Rust Inhibitive Steel Primers

Int/Ext Rust Inhibitive Steel Primers


Industrial Enamel primers are for industrial use and may be used on properly prepared interior or exterior ferrous metal surfaces. Rust inhibitive formulation to keep corrosion in check.
Int/Ext Semi-Gloss Acrylic Metal Finish

Int/Ext Semi-Gloss Acrylic Metal Finish


Acrylic Metal Finish is formulated especially for use as a topcoat for direct application to most properly prepared and primed interior or exterior metal surfaces. This product also can be used on concrete, masonry, plaster, drywall, and incidental wood surfaces.